Youtube Linkedin

Category: Dairy

Continuous Pasteuriser

Products

Industry

All

CONTINUOUS PASTEURISERS

ST&M plate type continuous pasteurisers

The Stainless Tank & Mix Continuous Pasteuriser is designed especially for processing of milk, cheese, yogurt, cream, ice cream, juice, liquid egg, fruit juice, wine etc. and can cater for production rates of 100L/hr to 10,000L/hr.

The ST&M Continuous Pasteuriser is a fully automatic compact processing system with number of heat exchangers, processing valves, sensors, hygienic pumps, and a control system, which are integrated to guarantee a secure and repeatable production process. Heating and cooling is achieved through heat exchangers, regeneration technology is used where possible to reduce operating costs.

All ST&M Pasteurisers are designed and certified to comply with Australian standards & Safe Food Australia and are offered as a skid mounted compact design as standard. Data logging provides a record of process history, and settings can be pre-set for different product recipes. A fully adjustable Temperature Controller for precise heating and cooling gives the pasteuriser operator scope to fine tune results.

Each pasteuriser is fully CIP (Clean-In-Place) Compatible, the controls are very user friendly and each unit can be designed to fit in the space available for each site.

At Stainless Tank & Mix we work closely with the customer to design each pasteuriser to suit their site specific requirements whether that be:

  • What heating source will best suit
  • Single or 3 phase power supply
  • Space constraints etc.

Products

Industry

All

CIP Systems – Clean In Place Systems

Products

Industry

All

Stainless Steel CIP Systems

CIP (Clean in place) enables the customer to quickly and effectively clean equipment

CIP (Clean in place) enables the customer to quickly and effectively clean equipment and pipework without the need to dismantle / disassemble the equipment and clean each item by hand. Automating this process also gives the advantage of using more aggressive chemicals which cannot be safely handled manually.

The knowledge Stainless Tank & Mix has of the industry is reflected in the way any item of equipment is designed so as to be conducive to and facilitate the process of cleaning in place.

Products

Industry

All

Dairy Tanks & Silos

Products

Silos, Tanks, Vessels & Vats

Liquid Blending

Powder Blending

Pasteuriser & Cooking System

Other Products

Industry

Dairy

Pharmaceuticals

Food

Beverage

Chemicals & Cosmetics

Process Engineering

All

Products

All Products
Associated Powder Blending Equipment
Auger Mixers
Automation
Batch Pasteurisers
Bottom & Side Entry Mixers
Cabinets & Workbenches
Cage / Anchor Mixers
CIP Systems
Clamp on Mixers
Concrete Mixers
Continuous Pasteuriser
Contra Rotating Mixers
Cooling Tunnels
Custom Fabricated Copper Stills
Dairy Tanks & Silos
Design & Consulting
Ductwork
Emulsifiers
Heat Exchangers
Helical Ribbons
Hoppers & Chutes
IBCs
Jacketed Vessels
Magnetic Drive Mixers
Materials Handling
Milk, Yoghurt, Cheese Vats
Mix Stations
Mixing Vessel
Mobile Tanks
Pipework
Plough Blenders
Pressure Vessels
Process Tanks
Process Tanks & Vessels
Ribbon Blenders
Silos & Storage Tanks
Specialised Equipment
Specialised Vessels
Top Entry Agitators
Turnkey Projects
Vats & Drums

Dairy Tanks & Silos

Stainless steel silos

Stainless Tank & Mix is one of the market leaders in Australia in the design and fabrication of storage tanks for the water, food & beverage, pharmaceutical, dairy, wine and chemical industries. ST&M fabricate silos in a wide range of sizes to suit our client’s requirements and we are well positioned to deliver the highest quality silos within budget and on time.
Mostly the dimensions of the silo are governed by constraints specific to the particular site where the silo is to be installed. Usually it is advantageous to design the silo tall and skinny so as not to take up too much room on site, but in the case of powdered product, this is necessary so the steep bottom cone is more manageable.
It is a good idea to determine what the expected delivery volume is likely to be and then factor in a relevant buffer volume that will ensure production is not held up should the delivery run late.
Depending on the required volume 3500mm in diameter is a generally accepted transportable diameter, but where the requirement is exceptional, up to 4800mm in diameter can be transported, but should be avoided if possible.
Stainless Tank & Mix can provide dimple plate [cavity wrap] to assist in temperature control whether it is heating or cooling that is required. Silos can be then insulated with a variety of materials such as polystyrene board, Rockwool or polyurethane and then clad with pop-rivetted colourbond sheeting, stainless steel sheet of seal welded stainless steel sheet.

Products

Silos, Tanks, Vessels & Vats

Liquid Blending

Powder Blending

Pasteuriser & Cooking System

Other Products

Industry

Dairy

Pharmaceuticals

Food

Beverage

Chemicals & Cosmetics

Process Engineering

All

Products

All Products
Associated Powder Blending Equipment
Auger Mixers
Automation
Batch Pasteurisers
Bottom & Side Entry Mixers
Cabinets & Workbenches
Cage / Anchor Mixers
CIP Systems
Clamp on Mixers
Concrete Mixers
Continuous Pasteuriser
Contra Rotating Mixers
Cooling Tunnels
Custom Fabricated Copper Stills
Dairy Tanks & Silos
Design & Consulting
Ductwork
Emulsifiers
Heat Exchangers
Helical Ribbons
Hoppers & Chutes
IBCs
Jacketed Vessels
Magnetic Drive Mixers
Materials Handling
Milk, Yoghurt, Cheese Vats
Mix Stations
Mixing Vessel
Mobile Tanks
Pipework
Plough Blenders
Pressure Vessels
Process Tanks
Process Tanks & Vessels
Ribbon Blenders
Silos & Storage Tanks
Specialised Equipment
Specialised Vessels
Top Entry Agitators
Turnkey Projects
Vats & Drums

Batch Pasteuriser

Products

Industry

All

Stainless Steel Batch Pasteurisers

Perfect Pasteurisation for all Food & Beverages

The Stainless Tank & Mix Batch Pasteuriser is designed especially for small batch processing of milk, cheese, yogurt, cream, ice cream, juice, liquid egg, fruit juice, wine etc. in a range of sizes of 150, 300, 500 and 1000 litres.

The ST&M Pasteuriser is a fully automatic, compact processing plant integrated with a high efficiency heater, agitator and control system, and is well suited to guarantee a secure and repeatable production process. Heating and cooling is through a double jacket.

Stainless Steel ST&M Pasteurisers are designed and certified to comply with Australian standards & Safe Food Australia and are offered as a skid mounted compact design as standard. Data logging provides a record of process history, and settings can be pre-set for different product recipes. A fully adjustable Temperature Controller for precise heating and cooling gives the operator scope to fine tune results.

Each pasteuriser is fully CIP (Clean-In-Place) Compatible, the controls are very user friendly and each unit can have an agitator paddle designed according to product characteristics.

At Stainless Tank & Mix we work closely with the customer to design each pasteuriser to suit their site specific requirements considering options such as:

  • What heating source will best suit
  • Single or 3 phase power supply
  • Space constraints etc.
  • Additional items such as a manual curd cutting knife




Products

Industry

All

  • National Foods often require prompt/emergency response and ST&M have not disappointed

    Ray

  • You did a much better job than I anticipated. Also the price compared with the opposition job of lesser quality.

    M.Malone

  • A general pleasant and professional approach

    Tony

  • Always able to help with prompt replies to requests

    John M

  • Work is carried out on time every time and the product and workmanship is first class

    Jeff

  • Reliability is very good – jobs done on time and to a high standard

    Paul. C

  • (regarding reliability) – has never had to be questioned as this stems from positive customer service

    Bruce. H

  • Both quality and workmanship often exceed requirements on both offsite and onsite projects

    Ray

  • Fine standard of workmanship that meets specification requirements on a continual basis

    Mike

  • Quality and workmanship is unsurpassed

    Jeff

  • Always deliver on time and are honest enough to advise if a delivery cannot be achieved whenever this may arise

    Michael

Contact Us

Previous Next
Close
Test Caption
Test Description goes like this